Microscope Lamps and Accessories
Electron Microscopy Sciences Maxtaform 150 mesh, Nickel
Maxtaform grids with clean and smooth edges, firm support, and a large open area. 3 mm diameter, 0.75 mil thickness.
Grid: Nickel
Pitch: 165 µm
Hole: 131 µm
Bar: 34 µm
:
Morrell Instrument Company Inc CFI PLAN FLUR100X/1.30/0.20OIL
NC3849807 CFI PLAN FLUR100X/1.30/0.20OIL
Electron Microscopy Sciences Gilder Aperture Grid with Single 1500 µm hole, Copper
Single Slot aperture grids have a thickness of are 50 microns. Aperture diameter is 1500 um.
Material: Copper
Electron Microscopy Sciences EMS Strip Aperture JEOL, 30-50-150 µm holes, 9.0 x 2.35 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 30-50-150 µm
Dimensions: 9.0 x 2.35 x 0.10 mm
Electron Microscopy Sciences Cross Lines Graticle NE81, 19 mm, Nominal line width 0.040 mm
Used as NE50 but for measurements in two directions and for sighting and alignment. Image covers the entire field of view.
Size: 19 mm
Divisions: Nominal line width 0.040 mm
Surface: Chrome image
Electron Microscopy Sciences Low Magnification SEM Test Specimen Tin On Carbon, JEOL Stub
This low magnification test has a size range of 1 - 10μm for table-top SEM. Has a magnification range of 250-5,000x. Can be used on FESEM and FIB as well.
Type: JEOL Stub
Electron Microscopy Sciences Amray 1000/1200/1400 Pin Stub 1/2" head, Carbon, 1/8" Pin diameter
Scanning electron microscope specimen mounts for AMRAY 1000/1200/1400 SEMs. Made from spectroscopically pure carbon.
Head: 1/2"
Pin diameter: 1/8"
Electron Microscopy Sciences SEM Stub Hitachi Cylinder 5/8" surface, 1/2"height, Aluminum
Hitachi SEM mounts are made from lathe finished ultra-pure aluminum.
Head: 5/8"
Height: 1/2"
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1/2" Head with Shorter Pin (5 mm), Aluminum, 3.1 mm Pin diameter
SEM stub specimen mount with tapered end pin and slotted head for use with LEO SEMs. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1/2"
Pin height: 5 mm
Electron Microscopy Sciences Single Cross Line Reticle RET 42, 19 mm, 9 µm Line width
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 19 mm
Line width: 9 µm
Electron Microscopy Sciences Gilder Aperture Grid with Single 800 µm hole, Nickel
Single Slot aperture grids have a thickness of are 50 microns. Aperture diameter is 800 um.
Material: Nickel
Electron Microscopy Sciences SEM Stub Freeze Dry Holder
Our aluminum stub holder offers many uses, including holding " (3.1 mm) pin stubs for freeze drying. Has a diameter of 3.1 mm and holds five pin stubs.
Morrell Instrument Company Inc CFI PLAN ACHROMAT 20X / 0.40 /
NC3373246 CFI PLAN ACHROMAT 20X / 0.40 /